2 Piece Stubby Screwdriver Set – CR-V Magnetic Tips, Bi-Material Non-Slip Grip – Slotted Phillips or PZ2

Why You Need a Stubby Screwdriver

Most people own at least one full-length screwdriver. What catches most people out is the screw they cannot reach with it — the hinge fastener sitting directly against a cabinet frame, the terminal screw inside a switch box, the back panel fixing on an appliance that has three centimetres of clearance above the screw head. A standard 200mm driver shaft hits the surrounding surface before the tip even engages. A stubby body does not have that problem. The whole point of the format is reach in situations where length works against you.

These 2-piece stubby screwdriver sets give you two of the most commonly needed driver types in a short-body format with Chrome Vanadium (CR-V) steel tips, magnetic tip retention, and a bi-material non-slip grip handle shaped for palm-pressure driving in tight spaces.

Which Variant to Choose

Yellow / Black (54249c) — Slotted + Phillips Slotted flat tip and Phillips cross-head — the two driver types that cover the majority of domestic hardware, general DIY, and light automotive fixings. Yellow accent handle on a black bi-material grip. The Phillips tip suits most cross-head screws found in flatpack furniture, appliances, and general household fixings.

Red / Black  — 6mm Slotted + PZ2 6mm slotted flat tip and PZ2 Pozidrive cross-head — the combination for European-specification screws, timber construction fixings, and the large proportion of British building and joinery hardware that uses Pozidrive rather than Phillips. If you work on timber frames, kitchen fitting, or door furniture, PZ2 is often the correct drive. Red accent handle on a black bi-material grip. 6×38mm body dimensions.

What Makes These Practical to Use

CR-V steel tips: Chrome Vanadium holds the driving edge profile longer than standard carbon steel — less rounding, less cam-out risk on tight fasteners, and more consistency across the life of the tool.

Magnetic tip: Holds the screw against the tip for single-handed starting — essential in confined spaces where the other hand is bracing the work, holding a torch, or simply cannot reach around to guide the screw in. The screw stays on the driver rather than falling into a cavity or appliance.

Bi-material handle: The rigid inner structure transfers torque directly; the soft outer layer with textured knuckle pads cushions hand pressure during extended use and prevents slipping when hands are damp or greasy. The barrel shape is built for palm grip and downward pressure — the way you actually drive a stubby in a tight space.

Where the Short Body Is Necessary

Cabinet hinges and door hardware pressed against frames, terminal screws in mounted switch boxes and socket backs, appliance panel fixings with limited clearance, computer chassis panels, kitchen unit interior hardware, vehicle door card and trim fasteners, and any other situation where the space above or around a screw head is smaller than the length of a standard driver.

Features at a Glance

• CR-V steel tips — harder, more wear-resistant driving edges than standard carbon steel
• Magnetic tip on both drivers — holds screws during single-handed insertion
• Bi-material handle — rigid core for torque, soft non-slip outer with knuckle grip pads
• Stubby short body — built for restricted-access fasteners that a full-length driver cannot reach
• Two tip combinations — Phillips+Slotted (54249c) or PZ2+6mm Slotted (54247c) to match your most common screw types
• Two colour variants — easy to identify each set at a glance in a drawer or tool bag

Specifications